4.
With A/C : Remove the A/C compressor.
(Refer to Heating, Ventilation Air conditioning - "Compressor")
Without A/C : Remove the dummy pulley bracket assembly.
Tightening torque :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
Drain the engine oil.
(Refer to Lubrication System - "Engine Oil")
Remove the oil filter & cooler assembly.
(Refer to Lubrication System - "Oil Filter & Cooler Assembly")
With A/C : Remove the A/C compressor.
(Refer to Heating, Ventilation Air conditioning - "Compressor")
Without A/C : Remove the dummy pulley bracket assembly.
Tightening torque :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)
Remove the oil level sensor. (Europe only)
(Refer to Lubrication System - "Oil Level Sensor")
Remove the lower oil pan.
Unfasten the bolts in the sequence shown.
Using the SST (09215-3C000) (A), remove the lower oil pan (B).
When removing the lower oil pan, use the SST (09215-3C000) in order not to damage the surface between the upper oil pan and lower oil pan.
Insert the SST between the lower oil pan and upper oil pan by tapping it with a plastic hammer in the direction of ① arrow.
After tapping the SST with a plastic hammer along the direction of ② arrow around more than 2/3 edge of the lower oil pan, remove it from the upper oil pan.
Do not turn over the SST abruptly without tapping. It may be result in damage of the SST.
Remove the upper oil pan.
Unfasten the bolts (A) for transaxle case.
Unfasten the bolts in the sequence shown.
Using the SST (09215-3C000) (A), remove the upper oil pan (B).
When removing the upper oil pan, use the SST (09215-3C000) in order not to damage the surface between the cylinder block and upper oil pan.
Insert the SST between the upper oil pan and cylinder block by tapping it with a plastic hammer in the direction of ① arrow.
After tapping the SST with a plastic hammer along the direction of ② arrow around more than 2/3 edge of the upper oil pan, remove it from cylinder block.
Do not turn over the SST abruptly without tapping. It may be result in damage of the SST.
