13521967

1.

Apply liquid gasket evenly to the mating surface of the upper oil pan.

note

●

Standard liquid gasket : LOCTITE 5900H or equivalent.

●

Check that the mating surfaces are clean and dry before applying liquid gasket.

●

Apply liquid gasket in a 4 mm (0.16 in) (5 mm (0.2 in) or above for T-joint and 3.5 mm (0.14 in) for rear oil seal) wide bead without stopping.

●

Install the oil pan in 5 minutes after applying the liquid gasket.

●

After installing the oil pan, wait at least 30 minutes before filling the engine with oil.

●

Remove liquid gasket overreached from the rear oil seal area after installing.

●

Remove liquid gasket overreached from the contact surface between the cylinder bock and timing chain cover before installing the upper oil pan.

note

Be careful not to apply an excessive amount of liquid gasket or by a wrong path. If the liquid gasket flows into the holes for installing the rear oil seal case assembly, it may cause the boss crack or contamination.

2.

Install the upper oil pan.

(1)

Fasten the bolts in the sequence shown.

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

(2)

Fasten the bolts (A) for transaxle case.

Tightening torque :

39.2 ~ 46.1 N.m (4.0 ~ 4.7 kgf.m, 28.9 ~ 34.0 lb-ft)

3.

Apply liquid gasket evenly to the mating surface of the lower oil pan.

note

●

Standard liquid gasket : LOCTITE 5900H or equivalent.

●

Check that the mating surfaces are clean and dry before applying liquid gasket.

●

Apply liquid gasket in a 4 mm (0.16 in) wide bead without stopping.

●

Install the oil pan in 5 minutes after applying the liquid gasket.

●

After installing the oil pan, wait at least 30 minutes before filling the engine with oil.

4.

Install the lower oil pan.

Fasten the bolts in the sequence shown.

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

5.

Install the other parts in the reverse order of removal.

6.

Refill with the engine oil.

(Refer to Lubrication System - "Engine Oil")

7.

Fill the radiator with coolant.

(Refer to Cooling System - "Coolant")