Remove the engine cover.
Remove the air duct.
(Refer to Intake and Exhaust System - "Air Cleaner")
Remove the battery.
(Refer to Engine Electrical System - "Battery")
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
Remove the intercooler inlet pipe & hose (A).
Tightening torque
Clamps :
4.9 ~ 6.9 N.m (0.5 ~ 0.7 kgf.m, 3.6 ~ 5.1 lb-ft)
(If equipped with a cap, tighten it until the cap is removed.)
Bolt :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Align the marks of the intercooler pipes/hoses and assembling parts.
Disconnect the intake air temperature sensor connector (A).
Disconnect he intercooler outlet pipe & hose (A).
Tightening torque :
4.9 ~ 6.9 N.m (0.5 ~ 0.7 kgf.m, 3.6 ~ 5.1 lb-ft)
(If equipped with a cap, tighten it until the cap is removed.)
Align the marks of the intercooler pipes/hoses and assembling parts.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
Remove the air intake shield (A).
Remove the radiator upper bracket (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Remove the intercooler upper bracket (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Remove intercooler assembly (A) from the vehicle.
Install in the reverse order of removal.
