3.
Rmove the rear oil sela(A).
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
Remve the flywheel.
(Refer to Cylinder Block - "Flywheel")
Rmove the rear oil sela(A).
Install rear oil seal.
Apply engine oil to a new oil seal lip.
Using SST(09231-H1100, 09214-3K100) (B) and a hammer, tap in the oil seal (A) until its surface is flush with the rear oil seal retainer edge.
Install the drive plate.
(Refer to Cylinder Block - "Drive Plate")
Install the flywheel.
(Refer to Cylinder Block - "Flywheel")
Install the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
