3.
Remove the A/C compressor bracket (A).
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
Remove the A/C compressor.
(Refer to Heating, Ventilation, Air Conditioning - "Compressor")
Remove the A/C compressor bracket (A).
Drain the engine oil.
Remove the oil pan (A). Insert the blade of SST (09215-3C000) between the ladder frame and oil pan. Cut off applied sealer and remove the lower oil pan.
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of ① arrow.
After tapping the SST with a plastic hammer along the direction of ② arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.
Do not turn over the SST abruptly without tapping. It be result in damage of the SST.
