3.
Monitor the "BATTERY VOLTAGEcurrentdata12345#" parameter on the GDS.
Specification : Battery Voltage
Fig.1) Engine speed (4WD)
Connect GDS to Data Link Connector(DLC)
Engine "ON".
Monitor the "BATTERY VOLTAGEcurrentdata12345#" parameter on the GDS.
Specification : Battery Voltage
Fig.1) Engine speed (4WD)
Is parameter within specifications?
 | ▶ Fault is intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and 4WD ECU memory is not cleared yet. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage. ▶ Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to "W/Harness Inspection" procedure. |
