5.
Are any DTCs present ?
 | ▶ Substitute with a known-good "Coupling" and check for proper operation. If the problem is corrected, replace "Coupling" and then go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to "Component Inspection" procedure. |
Connect GDS to Data Link Connector(DLC)
IG key "ON" , Engine "ON".
Warm up the engine to normal operating temperature.
Monitor diagnostic trouble code and present of trouble code.
Using a GDS, Check if the same DTC re-sets after clearing DTC.
Are any DTCs present ?
| ▶ Substitute with a known-good "Coupling" and check for proper operation. If the problem is corrected, replace "Coupling" and then go to "Verification of Vehicle Repair" procedure. |
| ▶ Go to "Component Inspection" procedure. |
