If the PCM detects an error in the calibration time of the LPC a DTC P2610 is set.
Item | Detecting Condition | Possible cause | |
DTC Strategy | Case1 |
•
Compares the time elapsed recorded by the Low Power Counter (LPC) against that recorded by the test timer | 1. PCM 2. Poor Battery Condition 3. Connecting condition |
Case2 |
•
Checks for abnormal resets of the LPC | ||
Enable Conditions | Case1 |
•
Engine running longer than 10sec.
•
Battery voltage greater than 8V | |
Case2 |
•
No Memory Failure Occurred | ||
Threshold value | Case1 |
•
The difference between the counter the LPC and the calibration the test timer clocks up longer than 20sec. | |
Case2 |
•
The LPC is reset to zero abnormally | ||
Diagnosis Time |
•
- | ||
MIL On Condition |
•
No MIL (DTC Only) | ||
