IG "OFF". Disconnect OTS connector.
Measure resistance between signal and ground terminals of OTS connector (Component Side) after recording the temperature of EOTS with GDS.
Temperature(℃/℉) | Resistance(kΩ) |
-40°C (-40°F) | 52.15㏀ |
-20°C (-4°F) | 16.52㏀ |
0°C (32°F) | 6.0㏀ |
20°C (68°F) | 2.45㏀ |
40°C (104°F) | 1.11㏀ |
60°C (140°F) | 0.54㏀ |
80°C (176°F) | 0.29㏀ |
Is the measured resistance within specification ?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Substitute with a known - good OTS and check for proper operation. If the problem is corrected, replace OTS and go to "Verification of Vehicle Repair" procedure. |
