Is it possible to erase the DTC with GDS ?
 | ▶ Check head lamp movement with actuation test, and then, go to "Verification of Vehicle Repair" Procedure. |
 | ▶ Substitute with a known-good "AHLS ECU(SENSOR)" and check for proper operation. If the problem is corrected, replace "AHLS ECU(SENSOR)" and then go to "Verification Vehicle Repair" procedure. ▶ After its repair done, Perform the lamp actuation by GDS in order to verify its normal operation. |
Perform Vehicle Selection and Level Initialization with GDS if AHLS ECU is repalce. (Auto Levelling Sensor)
Fig.1) Vehicle Selection and Leveling Initialization 1
Fig.2) Vehicle Selection and Leveling Initialization 2
Fig.3) Vehicle Selection and Level Initialization 3
Fig.4) Vehicle Selection and Level Initialization 4
