Monitor GDS Data
1.

Connect GDS.

2.

IG "ON" and engine "OFF".

3.

Select "DTC Analysis" mode.

4.

After erase DTC

5.

Is the same DTC occurred again?

▶ Go to next procedure.

▶ Fault is intermittent caused by poor contact in the sensor's and/or IPM[PAS(Parking Assist System)]'s connector.

Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика