This code reports an error in LIN line. The purpose is to verify the status of IPM(PAS), Sensor and Wire when error is detected at PAS of Rear Left Side Sensor.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal output of Rear Left Side Sensor and LIN line checking. | 1. TX line of Rear Left Side Sensor open or poor connection. 2. Ground line of Rear Left Side Sensor open or poor connection. 3. Power line of Rear Left Side Sensoropen or poor connection. 4. Replace a sensor after checking a wire of Rear Left Side Sensor. |
Enable Conditions |
•
IG KEY ON, Shift lever R | |
Threshold Value |
•
Rear Left Side Sensor fault.
•
LIN communnication fault.
•
Poor connection.
•
LIN line open. | |
Diagnostic Time |
•
Immediately(More than 4 times after IG KEY ON) | |
DTC Erasing Time |
•
DTC is erased immediately after trouble fixed |
