B2358 is outputted when there is open/short to ground in "ACTIVE HOOD LH" fuse/circuit.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Monitoring power supply voltage | 1. LH actuator fuse not combined (Burned damage) 2. LH actuator power circuit open 3. LH actuator power circuit short to ground | |
Enable Conditions |
•
IG key "ON" | ||
Threshold Value |
•
Relevant input section’s voltage maintain less than 5V for 3sec | ||
Diagnostic Time |
•
100㎳ | ||
Fail-safe |
•
AHS operates normally | ||
Cancellation | Active DTC |
•
Relevant input section’s voltage detects more than 5V
•
Can be erased by GDS | |
History DTC |
•
Can be erased by GDS | ||
