Component Location
1. HECU
2. MDPS(SAS)
General Description

The Steering angle sensor(SAS) is installed in MDPS assembly.

The SAS is used to determine turning direction and speed of the steering wheel.

The HECU uses the signals from the SAS when performing ESP-related calculations.

DTC Description

The HECU checks the CAN communcation lines for normal control and if a steering anlge sensor's message is not received for a certain period, this DTC is set.

DTC Detecting Condition

Item

Detecting Condition

Possible cause

DTC Strategy

•

CAN message monitoring

1.

Faulty Steering Angle Sensor(SAS)

2.

Open or short in CAN communication line

Enable Conditions

•

When the steering anlge sensor's messages are not received for more than 0.5 second with a normal voltage condition

Fail Safe

•

Inhibit the ESP/DBC control and allow the ABS/EBD contro

•

The ESP/DBC warning lamp is activated

Diagnostic Circuit Diagram
Яндекс.Метрика