Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
Turn the steering wheel so that the front wheels can face straight ahead.
Remove the airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
Disconnect the connector & lock nut (A) and then remove the steering wheel by using special service tools (09561-11001).
Tightening torque : 39.2 ~ 49.0 N.m (4.0 ~ 4.5 kgf.m, 28.9 ~ 36.2 lb-ft)
Do not hammer on the steering wheel to remove it; it may damage the steering column.
Installation is the reverse of the removal.Removal
Remove the steering wheel cover (B) after loosening the screw (A-6ea).
Disconnect the streeing wheel remote control switch connector (A).
Remove the remote control switch (A).
Install in the reverse order of removal.
Make sure that the switch connector is plugged in properly.
