Removal and Installation
1.

Remove the drive belt.

(Refer to Timing System - "Drive Belt")

2.

Remove the crankshaft damper pulley (A).

Tightening torque :

196.1 N.m (20.0 kgf.m, 144.7 lb-ft) + 60°

note

Do not press the pulley or apply the excessive force to prevent the rubber part from being deformed.

caution

Fix the ring gears using the SST (09231-2B100) (A) after removing the starter. Then remove the crankshaft damper pulley bolt.

3.

Install in the reverse order of removal.

Inspection

Check the crankshaft damper pulley for vibration in rotation, oil or dust deposit of V-ribbed part. Replace if necessary.

Яндекс.Метрика