Removal and Installation
1.

Remove the drive belt.

(Refer to Timing System - "Drive Belt")

2.

Remove the crankshaft damper pulley (A).

Tightening torque :

196.1 N.m (20.0 kgf.m, 144.7 lb-ft) + 60°

note

Do not press the pulley or apply the excessive force to prevent the rubber part from being deformed.

caution

Fix the ring gears using the SST (09231-2B100) (A) after removing the starter. Then remove the crankshaft damper pulley bolt.

3.

Install in the reverse order of removal.

Яндекс.Метрика