2.
Disconnect the fuel hose quick connectors (A) and brake booster vacuum hose (B).
[Standard]
[Low Power]
Disconnect the battery negative terminal.
Disconnect the fuel hose quick connectors (A) and brake booster vacuum hose (B).
Remove the fuel hose bracket (A) and the function block (B).
Detach the wiring protector (A) after unfastening the mounting bolts.
Remove the engine coolant temperature sensor (A).
(Refer to Engine Control/Fuel System - "Engine Coolant Temperature Sensor (ECTS)")
Rotate the water pipe hose clamp (B) in order to make room for socket wrench.
Disconnect the vacuum hose (A).
Remove the vacuum pump (A) with the O-ring (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Do not disassemble the vacuum pump.
Be careful not to miss the O-ring (A) out of the vacuum pump before installing the vacuum pump.
Install in the reverse order of removal.
