2.
Remove the upper air guard (A) on the radiator assembly.
Tightening torque:
2.8 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2.1 ~ 2.4 lb-ft)
Remove the radiator assembly from the vehicle.
(Refer to Cooling System - "Radiator")
Remove the upper air guard (A) on the radiator assembly.
Tightening torque:
2.8 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2.1 ~ 2.4 lb-ft)
Remove the cooling fan (A) from the radiator.
Tightening torque:
4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Disconnect the wire harness connector (A) and the fan motor connector (B).
Remove the resistor (A) from the cooling fan shroud.
Tightening torque:
2.8 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2.1 ~ 2.4 lb-ft)
Install in the reverse order of removal.
