2.
Remove the flywheel (A).
Tightening torque :
117.7 ~ 127.5 N.m (12 ~ 13 kgf.m, 86.8 ~ 94.0 lb-ft)
note
●
Always use new drive plate (or flywheel) bolts.
●
Apply sealant to the screw part (10mm from the end of the bolt) when reusing the drive plate bolts.
Sealant: Three bond 2403, Loctite 200 or 204
●
Install and uniformly tighten the 7 bolts, in several passes.
