2.
Remove the air duct (A).
Remove the engine cover.
Remove the air duct (A).
Remove the battery.
(Refer to Engine Electrical System - "Battery")
Remove the air cleaner assembly.
Disconnect the air flow sensor (AFS) connector (A).
Disconnect the breather hose (A).
Disconnect the intake air hose (B) and remove the air cleaner assembly (C).
Tightening torque
Clamps :
2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)
Bolts :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Align the marks of the air intake hose and compressor.
Install in the reverse order of removal.
Open the service cover (A) by unhooking the clamps.
Replace the air cleaner element (A) with a new one.
If there are foreign substances inside the air cleaner assembly, wipe the inside of the air cleaner assembly and then replace the air cleaner element.
Close the service cover by hooking the clamps.
