5.
Disconnect the fan motor connector (A).
Disconnect the battery terminals.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
Remove the under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
Disconnect the fan motor connector (A).
Remove the air intake shield(A).
Remove the upper air guard(A) and radiator over flow hose(B).
Loosen the cooling fan mounting bolts and then disconnect the cooling fan assembly (A) from radiator.
Install in the reverse order of removal.
Disconnect the wire harness connector(A) and fan motor connector(B).
Remove the resistor(A) from fan shroud.
Tightening torque:
1.7 ~ 2.4 N.m (0.18 ~ 0.25 kgf.m, 1.3 ~ 1.8 lb-ft)
Install in the reverse order of removal.
Remove the cooling fan(A) from cooling assembly.
Tightening torque:
2.7 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2.0 ~ 2.3 lb-ft)
Remove the fan motor connector(A) from resistor.
Remove the fan motor(A) from cooling fan shroud.
Tightening torque:
3.9 ~ 5.8 N.m (0.4 ~ 0.6 kgf.m, 2.8 ~ 4.3 lb-ft)
Install in the reverse order of removal.
Disconnect the fan motor connector from the resistor.
Connect the battery voltage to the "+" terminal and ground to " - " terminal.
Check the cooling fan motor operates well.
