3.
Remove the LH air duct (A) for the rear seat.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the 2nd seat.
(Refer to Body - "Rear Seat Assembly")
Remove the LH air duct (A) for the rear seat.
Open the carpet for the fuel pump.
Remove the fuel pump service cover (A).
Disconnect the fuel pump connector (A) and the fuel feed tube quick-connector (B).
Disconnect the fuel return tube quick-connector (C).
Remove the fuel pump (C) after removing the plate cover (B) with SST (A) [SST No.: 09310-3P100 or 09310-2S100] from the fuel tank.
Installation is reverse of removal.
Fuel pump plate cover installation:
58.9 ~ 68.7 N.m (6.0 ~ 7.0 kgf.m, 43.4 ~ 50.6 lb-ft)
Check the groove (A) when installing the fuel pump.
