3.
Loosen the filler plug (A).
Uplift the vehicle with lift.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Loosen the filler plug (A).
Check the oil level.
Oil level must be up to fill the hole, if not, add oil until it runs over.
Install the filler plug.
Tightening torque :
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
Install the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Uplift the vehicle with lift.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Drain the manual transaxle oil after loosening the drain plug (A).
Install the drain plug with new gasket.
Tightening torque :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Loosen the oil level filler plug (A).
Add new oil through the filler plug hole.
Standard oil : SAE 75W/85, API GL-4, TGO-7
Oil capacity : 1.8 ~ 1.9 L (0.46 ~ 0.50 U.S.gal., 1.90 ~ 2.00 U.S. qt., 1.58 ~ 1.67 lmp qt.)
Install the filler plug.
Tightening torque :
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
Install the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
