4.
Loosen the bolts and then remove the rear air vent duct (A).
Remove the ignition key from the vehicle.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the floor console.
(Refer to Body - "Floor console")
Loosen the bolts and then remove the rear air vent duct (A).
Pull up the lock, of the SRSCM connector, the disconnect the connector (A).
Remove the SRSCM mounting bolts (3EA) from the SRSCM, then remove the SRSCM.
You must remove or install SRSCM or other SRS components with the ignition swich OFF to avoid accidental airbag deployment.
