Disconnect the negative (-) battery terminal.

Remove the cowl side trim.

(Refer to Body - "Crash Pad")

Using a screwdriver or remover, remove the crash pad side cover (A).

Disconnect the stopper (B) from the glove box (A).

Disconnect the air damper (A) from the glove box (B).

Disconnect the pins (A) and then remove the glove box (B).

After loosening the mounting screws, then remove the crash pad side garnish [RH] (A).

After loosening the mounting screws, then remove the crash pad under cover (A).

After loosening the mounting screws, then remove the glove box housing (A).

Disconnect the glove box lamp connector (A).

Disconnect the connector and then remove the auto defogging actuator (A) after loosening the mounting screws.

Install in the reverse order of removal.