Disconnect the negative (-) battery terminal.

Remove the glove box housing (A).

(Refer to Body - "Crash pad")

Remove the smart key unit (A) after removing the bolts and connectors.

Disconnect the negative (-) battery terminal.

Remove the console assembly (A).

(Refer to Body - "Console")

After loosening the antenna bolts (2EA) and connector, remove the interior 1 antenna (A).

Disconnect the negative (-) battery terminal.

Remove the floor console rear cover (A).

(Refer to Body - "Console")

After loosening the antenna nuts (2EA) and connector, remove the interior 2 antenna (A).

Disconnect the negative (-) battery terminal.

After loosening the mounting bolts, then remove the third seat assembly (A).

(Refer to Body - "Rear seat")

After loosening the antenna nuts (2EA) and connector (A), remove the interior 3 antenna (B).

Disconnect the negative (-) battery terminal.

Remove the rear bumper.

(Refer to Body - "Rear bumper")

Disconnect the antenna connector (A) on the center of rear bumper.

After loosening the nuts (2EA), remove the exterior bumper antenna (A).

Disconnect the negative (-) battery terminal.

Remove the front left wheel guide.

Disconnect the connectors, then remove the buzzer (A).

Disconnect the negative (-) battery terminal.

Disconnect the connector after removing the door trim.

(Refer to Body - "Front door")

After loosening the mounting bolt, then remove the key holder (A).

Remove the outside handle (A) by sliding it rearward.

Disconnect the negative (-) battery terminal.

Remove the tailgate garnish.

(Refer to Body - "Body side molding")

Remove the outside handle panel assembly (A) after removing the screws and connectors.

Remove the outside handle (A) after removing the screws.

Refer to BE group - inspection / self diagnosis with scan tool.

Refer to BE group - inspection / self diagnosis with scan tool.

Refer to BE group - inspection / self diagnosis with scan tool.

Check for continuity between the tailgate latch terminals.

If continuity is not specified, inspect the switch

Install the smart key unit.

Install the smart key unit mounting bolt and nut, and then connect the connector.

Install the glove box.

Install the negative (-) battery terminal and check the smart key system.

Install the interior 1 antenna.

Install the console assembly.

Install the negative (-) battery terminal and check the smart key system.

Install the interior 2 antenna.

Install the connector mounting bracket.

Install the console rear cover after connecting the connector.

Install the negative (-) battery terminal and check the smart key system.

Install the interior 3 antenna.

Install the third seat assembly.

Install the negative (-) battery terminal and check the smart key system.

Install the exterior bumper antenna.

Install the rear bumper.

Install the negative (-) battery terminal and check the smart key system.

Install the buzzer.

Install the front left wheel guide.

Install the negative (-) battery terminal and check the smart key system.

Install the outside handle.

Install the door trim.

Install the negative (-) battery terminal and check the smart key system.

Install the tailgate switch.

Install the tailgate garnish.

Install the tailgate trim.

Install the negative (-) battery terminal and check the smart key system.