4.
Remove the clutch tube from the concentric slave cylinder after loosening a nut (B).
note
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the air duct and air cleaner assembly
D 2.0 (Refer to Engine Mechanical System - "Air Cleaner")
D 2.2 (Refer to Engine Mechanical System - "Air Cleaner")
Remove the battery and battery tray.
D 2.0 (Refer to Engine Electrical System - "Battery")
D 2.2 (Refer to Engine Electrical System - "Battery")
Remove the concentric slave cylinder after removing a pin (A).
Remove the clutch tube from the concentric slave cylinder after loosening a nut (B).
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Loosen the clutch tube bracket bolts (A).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the fuel filter.
D2.0 (Refer to Engine Control/Fuel System - "Fuel Filter")
D2.2 (Refer to Engine Control/Fuel System - "Fuel Filter")
Remove the clutch tube (B) from the regulator (A).
Remove the air duct and air cleaner assembly.
G 2.4 MPI (Refer to Engine Mechanical System - "Air cleaner")
G 2.4 GDI (Refer to Engine Mechanical System - "Air cleaner")
Remove the battery and battery tray.
G 2.4 MPI (Refer to Engine Electrical System - "Battery")
G 2.4 GDI (Refer to Engine Electrical System - "Battery")
Remove the concentric slave cylinder tube (B) after removing the pin (A).
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Loosen the clutch tube bracket bolts.
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the clutch tube (B) from the regulator (A).
