Removal and Installation
1.

Disconnect the battery "-" terminal.

2.

To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).

[MDPS TYPE]
[HPS TYPE]
note

When installing the drive belt, follow the below order. crankshaft pulley → A/C compressor pulley → Idler Pulley → alternator pulley → water pump pulley →(power steering oil pump pulley [HPS type])→ drive belt auto tensioner pulley.

Rotate the auto tensioner arm by turning the auto tensioner arm boss (B) counterclockwise using a wrench.

After installing the drive belt to the auto tensioner pulley, slowly release the auto tensioner arm.

3.

Install in the reverse order of removal.

Inspection
Inspect Drive Belt

Visually check the belt for excessive wear, frayed cords etc.

If any defect has been found, replace the drive belt.

note

Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.

Drive belt, Idler, Belt tensioner pulley

Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.

Check the belt tensioner for excessive dust, crack, and damage. Replace if necessary.

Check the pulleys for vibration in rotation, oil or dust deposit of V-ribbed part. Replace if necessary.

Яндекс.Метрика