5.
Remove the water pump pulley (A).
Tightening torque :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Disconnect the battery "-" terminal.
Remove the engine under cover.
Drain the engine coolant.
(Refer to Cooling System - "Coolant")
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
Remove the water pump pulley (A).
Tightening torque :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Remove the water pump (A) and gasket (B).
Clean the contact face before assemble.
Always use a new gaskets.
Always use a new seal bolt (Bolt L)
Tightening torque
G(4) :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)
H(1) : 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
I(1) : 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
J(1) : 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
K(4) : 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
L(1):
21.6 ~ 26.5 N.m (2.2 ~ 2.7 kgf.m, 15.9 ~ 19.5 lb-ft)- New bolt
Install in the reverse order of removal.
Fill the radiator with coolant and check for leaks.
(Refer to Cooling System - "Coolant")
