Removal
Lower oil pan
1.

Disconnect the battery "-" terminal.

2.

Remove the engine under cover.

3.

Drain the engine oil.

(Refer to Lubrication System - "Engine Oil")

4.

Remove the lower oil pan (A).

note
●

Insert the blade of SST(09215-3C000) between the upper oil pan and lower oil pan.

Cut off applied sealer and remove the lower oil pan.

●

Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow.

●

After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.

●

Do not use the SST as a prybar.

Hold the tool in position (on the gasket line) and tap in with a light hammer.

●

Be careful not to damage the contact surfaces of Upper oil pan and lower oil pan.

Upper oil pan
1.

Remove the engine assembly from the vehicle.

(Refer to Engine And Transmission Assembly - "Engine And Transmission Assembly")

2.

Attach the engine to engine stand for disassembly.

3.

Remove the timing chain.

(Refer to Timing System - "Timing Chain")

4.

Remove the lower oil pan.

(Refer to Lubrication System - "Oil Pan")

5.

Remove the oil pump.

(Refer to Lubrication System - "Oil Pump")

6.

Remove the oil level gauge.

(Refer to Lubrication System - "Oil Level Gauge")

7.

Remove the air conditioning compressor.

(Refer to Heating, Ventilation, Air Conditioning - "Compressor")

8.

Remove the LH/RH exhaust manifold stays.

(Refer to Intake And Exhaust System - "Exhaust Manifold")

9.

Remove the upper oil pan (A).

note

Insert the blade of SST(09215-3C000) between the upper oil pan and lower oil pan.

Cut off applied sealer and remove the lower oil pan.

Яндекс.Метрика