13521862

1.

Install the lower oil pan (A).

(1)

Using a gasket scraper, remove all the old packing material from the gasket surfaces.

(2)

Before assembling the oil pan, the liquid sealant THREE BOND 1217H should be applied on oil pan. The part must be assembled within 5 minutes after the sealant was applied.

Bead width : 2.5 mm (0.1 in.)

caution

●

Clean the sealing face before assembling two parts.

●

Remove harmful foreign matters on the sealing face before applying sealant.

●

When applying sealant gasket, sealant must not protrud into the inside of oil pan.

●

To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.

●

After assembly, wait at least 30 minutes before filling the engine with oil.

(3)

Install the oil pan (A).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

2.

After assembly, wait at least 30 minutes before filling the engine with oil.

(Refer to Lubrication System - "Engine Oil")

3.

Install all other parts in reverse order of removal.

1.

Install the upper oil pan.

A.

Using a gasket scraper, remove all the old gasket meterial from the gasket surfaces.

B.

Before assembling the oil pan, the liquid sealant THREE BOND 1217H should be applied on upper oil pan.

The part must be assembled within 5 minutes after the sealant was applied.

Bead width : 2.5 mm (0.1 in.)

note

●

Clean the sealing face before assembling two parts.

●

Remove harmful foreign materials on the sealing face before applying sealant

●

When applying sealant gasket, sealant must not protrud into the inside of oil pan.

●

To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.

●

After assembly, wait at least 30 minutes before filling the engine with oil.

C.

Install the upper oil pan.

Uniformly tighten the bolts in several passes.

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

2.

Install all other parts in reverse order of removal.