3.
Remove the air duct (A).
Disconnect the battery "-" terminal.
Remove the engine cover.
Remove the air duct (A).
Remove the air cleaner assembly (A).
Disconnect the barometric pressure sensor (BPS) connector (B).
Disconnect the breather hose (C).
Loosen the clamp (D) and then disconnect the air intake hose from the throttle body.
Disconnect the brake vacuum hose (E).
Tightening torque
Hose clamp bolt:
2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)
Air cleaner assembly bolts:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Install in the reverse order of removal.
Open the service cover after pull the clamp of the air cleaner.
Replace new an air cleaner element (A).
If there are foreign substances inside the air cleaner assembly, wipe the inside of the air cleaner assembly and then replace the air cleaner element.
Close the service cover and then fix the clamp.
