13522175

1.

Install the oil pan.

(1)

Using a gasket scraper, remove all the old sealant material from the gasket surfaces.

(2)

Before assembling the oil pan, liquid sealant Loctite 5900H, Threebond 1217H or equivalent should be applied on oil pan. The part must be assembled within 5 minutes after sealant was applied.

Bead width : 3.0 mm (0.12 in.)

caution

●

When applying sealant gasket, sealant must not be protruded into the inside of oil pan.

●

To prevent leakage of oil, apply sealant gasket on the inner threads of the bolt holes.

(3)

Install the oil pan (A). Uniformly tighten the bolts in several passes.

Tightening torque

Bolts B (M9) :

30.4 ~ 34.3 N.m (3.1 ~ 3.5 kgf.m, 22.4 ~ 25.3 lb-ft)

Bolts C (M6) :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

caution

After assembly, wait at least 30 minutes before filling the engine with oil.

note

Always use a new drain plug gasket.

2.

Install the A/C compressor bracket (A).

Tightening torque :

19.6 ~ 23.5 N.m (2.0 ~ 2.4 kgf.m, 14.5 ~ 17.4 lb-ft)

3.

Install the A/C compressor lower bolts.

(Refer to Heating, Ventilation, Air Conditioning - "Compressor")

4.

Refill engine with engine oil.