5.
Disconnect the coolant hose (B) after removing the coolant hose clamp (A).
Drain the coolant.
(Refer to Engine Mechanical System-"Coolant").
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Disconnect the coolant hose (B) after removing the coolant hose clamp (A).
Disconnect the hose (B) after removing the automatic transaxle fluid cooler hose clamp (A).
When hose&pipe assembly
Align marking of pipe(B), marking of hose(A), and matching color each other.
Remove the ATF Warmer (A).
Tightening torque:
(A)7.8~11.8N.m(0.8 ~ 1.2 kgf.m, 5.8~8.7lb-ft)
Install in the reverse order of removal.
Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
