Monitor GDS Data
1.

Connect GDS.

2.

IG "ON" and engine "OFF".

3.

Select "Diagnostic Trouble Codes(DTC)" mode.

4.

After erase DTC

5.

Is the same DTC occurred again?

▶ Go to next procedure.

▶ Fault is intermittent caused by poor contact in the sensor's and/or BCM[PAS(Parking Assist System)]'s connector. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика