This code reports an error in LIN line. The purpose is to verify the status of BCM(PAS), Sensor and Wire when error is detected at PAS of Front Left Side Sensor.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal output of Front Left Side Sensor and LIN line checking(10ms) | 1. TX line of Front Left Side Sensor open or poor connection. 2. Ground line of Front Left Side Sensor open or poor connection. 3. Power line of Front Left Side Sensor open or poor connection. 4. Replace a sensor after checking a wire of Front Left Side Sensor. |
Enable Conditions |
•
IG KEY ON, Shift lever D | |
Threshold Value |
•
Front Left Sensor fault
•
LIN communnication fault
•
Poor connection
•
LIN line open | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
DTC is erased immediately after trouble fixed |
