▶ Poor contact at the SRSCM connector; check the connector.

▶ If the connector is OK,substitute a known-good SRSCM, and check for proper operation.

If the problem is corrected, replace SRSCM and then go to "Verification of Vehicle Repair" procedure.

▶ If the problem is still present, substitute the SRSCM and check for proper operation.

If the problem is corrected, replace SRSCM and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute a known-good PAD SWITCH, and check for proper operation.

If the problem is corrected, replace satellite driver sensor and then go to "Verification of Vehicle Repair" procedure.