The SRSCM sets DTC B140300 if there is any fault in PSIS circuit.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Data | 1. Faulty PSIS circuit. 2. Faulty PSIS. 3. Do not Replace SRSCM | |
Enable Conditions |
•
Ignition "ON" | ||
Threshold Value |
•
PSIS send defect code
•
PSIS output is not expected value | ||
Diagnostic Time | Qualification |
•
More than 5 ms (500μs x 10) | |
De-Qualification |
•
More than 10 ms (500μs x 20) | ||
