This DTC B101052 is set when variant coding is incorrectly performed as if ESP option is installed on the vehicle even though real vehicle has not ESP on the CAN BUS.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Check CAN communication | 1. Check option information and performance of cluster 2. Perform culster coding procedure 3. Check ESP CM 4. Check CAN line 5. Check Cluster | |
Enable Conditions |
•
IG key "ON" | ||
Case1 | ThresholdValue |
•
ESP scan error | |
DTC ErasingTime |
•
In case of correctly performed coding procedure | ||
Case2 | ThresholdValue |
•
End of line has ESP option information even though ESP has not been detected on the CAN BUS | |
DTC ErasingTime |
•
Erased DTC after solved problem | ||
Diagnostic Time |
•
500㎳ | ||
