PCM/ECM sets this code when the battery charging current from battery sensor is too low.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Signal Monitoring | 1. Poor connection 2. Open or short in charging system 3. Faulty charging system 4. Faulty PCM/ECM |
EnableConditions |
•
Engine running state
•
No LIN Bus error / No Plausibility Error related to smart sensor / No Alternator Error | |
Threshold value |
•
Battery charging current < Calibration
•
State of Charge(SOC) < Calibration | |
Diagnosis Time |
•
Continuous | |
MIL On Condition |
•
NO MIL ON(DTC only) |
