PCM/ECM sets DTC P0119 if the PCM/ECM detects signal increasing ratio exceeds the possible range of a properly operating ECTS.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal noise check | 1. Poor connection or damaged harness 2. Faulty ECT sensor |
Enable Conditions |
•
No relevant failure
•
Battery voltage >6V | |
Threshold Value |
•
Signal variation > 5℃(9℉) | |
Diagnostic Time |
•
0.5 sec. | |
MIL On Condition |
•
2 Drive Cycles |
