The PCM/ECM sets DTC P0336 when the crankshaft signal is missing while camshaft signal is detected.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal plausibility check | 1. Open or short in signal, ground or power supply circuit 2. Poor connection or damaged harness 3. Damage to the connecting flange/flywheel 4. Misadjust crankshaft and camshaft pulley position 5. Faulty CKP sensor | |
Enable Conditions |
•
Engine synchronized
•
Engine speed > 512rpm | ||
Threshold Value | Case 1) |
•
Tooth number check(Number of missing/additional teeth > 1) | |
Case 2) |
•
Tooth number check(Number of missing/additional teeth > 2) | ||
Diagnostic Time | Case 1) |
•
5 rev. | |
Case 2) |
•
3 rev. | ||
MIL On Condition |
•
2 Drive Cycles | ||
