Ignition "OFF"
Disconnect HO2S connector.
Measure resistance between power and control terminals of HO2S heater(Component Side).
Temp.(℃) | Temp.(℉) | Heater Resistance (Ω) |
18 ~ 20 | 64 ~ 82 | 9.0 |
Is the measured resistance within specification ?
 | ▶ Check for poor connection between PCM/ECM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "Verification of Vehicle Repair" procedure |
 | ▶ Check HO2S for contamination, deterioration, or damage. Substitute with a known-good HO2S and check for proper operation. If the problem is corrected, replace HO2S and then go to "Verification of Vehicle Repair" procedure |
Ignition "OFF"
Disconnect HO2S connector.
Measure resistance between power and control terminals of HO2S heater(Component Side).
HO2S Heater | Normal Parameter |
18 ~ 20℃ | |
Heater Resistance | 3.2±0.8 Ω |
Is the measured resistance within specification ?
| ▶ Check for poor connection between PCM/ECM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "Verification of Vehicle Repair" procedure |
| ▶ Check HO2S for contamination, deterioration, or damage. Substitute with a known-good HO2S and check for proper operation. If the problem is corrected, replace HO2S and then go to "Verification of Vehicle Repair" procedure |
