If sensor signal input is higher than 4.8V, ECM/PCM sets DTC P0108.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check, high
•
Out-of-range high | 1. Poor connection 2. Open or short to power in signal circuit 3. Open in ground circuit 4. MAPS |
Enable Conditions |
•
Engine speed : > 800 rpm | |
Threshold Value |
•
Sensor voltage > 4.8 V
•
MAP > 300 kPa | |
Diagnosis Time |
•
- | |
Mil On Condition |
•
2 trips |
