Checking output signals from CMP during engine running, if the expected number of cam tooth count is not observed, ECM/PCM sets P0366.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check | 1. Poor connection 2. abnormal assembling state 3. Open/short in signal circuit 4. CMPS |
Disable Conditions |
•
Gap in crankshaft found
•
No detection of P0335
•
No detection of P0336 | |
Threshold Value |
•
Unplausible signal per camshaft rev > 4 times | |
Diagnosis Time |
•
- | |
Mil On Condition |
•
2 trips |
