When the ETC motor control duty value is over 80% and 5 sec, ECM/PCM recognizes it as throttle valve sticking and sends P2118.
Item | Detecting Condition | Possible Cause | |
DTC Strategy | Case1 |
•
Throttle response check | 1. Poor connection 2. Open or Short in motor circuit 3. ETC motor |
Case2 |
•
Motor current range performance | ||
Enable Conditions |
•
- | ||
Threshold value | Case1 |
•
Difference between throttle set pos. and actual throttle pos. is higher than threshold | |
Case2 |
•
Actuator duty > 80% | ||
Diagnosis Time | Case1 |
•
0.5 sec. | |
Case2 |
•
5 sec.(Max error)
•
0.6 sec.(Min error) | ||
MIL On Condition |
•
1st Driving Cycle | ||
