2.
Remove the front door pull handle cap (B).
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Be careful not to scratch the door trim and other parts.
Using a screwdriver or remover, remove the front door inside handle cap (A).
Remove the front door pull handle cap (B).
After loosening the mounting screws, then remove the front door trim (A).
Remove the front door inside handle cage (A).
Disconnect the seat memory switch connecter (A), outside rear view mirror switch connector (B), power window switch connector (C).
Install in the reverse order of removal.
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Replace any damaged clips.
