Replacement
1.

Remove the rear door window glass.

(Refer to Rear Door - "Rear Door Window Glass")

2.

Disconnect the rear door main connector (A).

3.

Disconnect the rear door latch connector (A).

4.

After loosening the mounting bolts, then remove the rear door module (A).

Tightening torque :

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

5.

Remove the rear door main connector pad (A) and mounting clip (B).

6.

Disconnect the connectors and rear door module wiring harness (A).

7.

Reomove the rear speaker .

(Refer to Body Electrical System - "Speakers")

8.

Remove the rear power window motor.

(Refer to Body Electrical System - "Power Window Motor")

9.

Install in the reverse order of removal.

caution
●

The area of whole parts should be applied with sufficient grease.

●

Make sure connectors are connected properly and each rod is connected securely.

●

Make sure the door locks/unlocks and opens/closes properly

Яндекс.Метрика