1.
Using a screwdriver or remover, remove the center garnish [LH] (A).
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Using a screwdriver or remover, remove the center garnish [LH] (A).
Using a screwdriver or remover, remove the cluster fascia panel (A).
Disconnect the start/stop button connector (A).
Install in the reverse order of removal.
Make sure the connector are connected in properly.
Replace any damaged clips.
